Mit-ivy metal metal Advanced Acrylic Latex Sealing Primer dengan daya penembusan yang sangat baik
Permohonan
Ia mempunyai lekatan yang sangat baik pada substrat keluli dan primer berasaskan air yang serupa, dan sifat fizikal dan mekanikal yang sangat baik setelah gelombang cat mengering.
5. Filem cat mempunyai pengawetan cahaya dan pengawetan warna yang sangat baik selepas pengeringan.
Aplikasi yang disyorkan Ia sesuai untuk perlindungan saliran trak, bahagian mesin, peralatan industri ringan, dan lain-lain di mana perlindungan tinggi diperlukan.
Data teknikal Warna pelbagai
Kering permukaan (50% kelainan) 15 ℃ C <1h ； 25'C <0.5j
Kering kering (kelembapan 50%) 15'C <48j; 25 ° C <24 jam
Hit "kg.cm" 50
Air (50 ± 5μm) filem cat 72 jam tidak melepuh, tidak membantu jatuh, tidak berkarat.
Kekerasan 0.3 (pendulum berganda) sifat mekanikal menguji ketebalan filem (23 ± 3jμm)
Lekapan (Hegelian) Tahap 1
Rawatan permukaan Permukaan bahan yang dilapisi mestilah bebas dari kelembapan, minyak, karbon asid dan abu.
Butiran Pantas
Keluli dengan kulit oksida: Kaedah peledakan tembakan atau pasir seperti pemprosesan ke tahap Sa2.5, di mana peledakan pasir tidak dapat dilakukan harus digilap secara mekanikal atau
Dirawat secara kimia untuk menghilangkan semua bahu patah yang terapung.
Keluli tanpa kulit oksida: sandblasted (shotblasted) hingga Sa2.5 atau alat pengisaran elektrik yang diaktifkan udara ke St3.
Pengelasan kimpalan, pemotongan api atau kembang api kawasan lengkungan terbakar: mencanai ke tahap St3
Bahan asas dengan filem cat lama: keluarkan zarah dan karat cat lama yang longgar, dan pasir ke St3 dengan alat pengamplasan udara atau elektrik.
Pakej lukisan khas boleh digunakan dengan primer berasaskan air H902, atau digunakan sendiri sebagai pelapis hiasan umum, atau digunakan dengan produk primer jenis lain (perlu dipadankan untuk pengesahan).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
